RadioBDC Logo
Best Friend | Foster The People Listen Live
 
 
< Back to front page Text size +

DIY Oscars statue: Ken gets the Midas touch

Posted by Melissa Massello  February 23, 2013 12:27 PM

E-mail this article

Invalid E-mail address
Invalid E-mail address

Sending your article

oscars_statue_ken_doll_shoestring.jpg

Photo: Melissa Massello/Shoestring

Make a DIY Oscars statue in minutes using a Ken doll & some paint.

No Oscars party is complete with its own awards statue, and as we get ready for our annual #OscarUp tomorrow at 40Berkeley, we decided to create this DIY version of the iconic golden guy — using a Ken doll and some spray paint — in just a few minutes. Here's how we did it.

oscar_ken_supplies.jpgSupplies:

  • Ken doll
  • Mod Podge (if Ken has hair)
  • Wooden base
  • Plaid black acrylic paint
  • Sponge or brush
  • Rust-Oleum Metallic gold spray paint
  • Gorilla Glue

oscar_ken_haircut_mod_podge.jpg

Your Ken Doll needs to get his golden glow on, but if he has hair you'll first want to cut it short (think less flow and more Justin Bieber) and then slick it back using a little Mod Podge (less than a teaspoon). Let the Mod Podge dry for about 30 minutes (until clear and not tacky to the touch.)

oscar_ken_gold_spray_paint.jpg

Once the Mod Podge is dry, it's time to give Ken the Midas touch. Prop Ken up and spray evenly with the Rust-Oleum Metallic spray paint (holding can approximately a foot away). Wait 8 to 10 minutes for the first coat to dry, then flip and spray Ken's back. Wait another 20 minutes until fully dry before attaching to the base.

oscars_ken_paint_base.jpg

While waiting for Ken to dry, give your base two coats of the black acrylic paint. We picked up a $1 unfinished wooden base at AC Moore (after realizing that our planned Play-Doh container was too small for Ken's feet). Coat using a sponge or small brush, going with the wood's grain, and let dry 10 minutes between each coat.

oscars_ken_gorilla_glue.jpg

Once Ken and his pedestal are dry, lightly dampen the top of the wooden base before adding a small pool of Gorilla Glue. (I also added some Gorilla Glue to Ken's feet before securing him to the pedestal, which may have been too much — see below.) Press Ken firmly to the base for about 5 minutes to let the Gorilla Glue start to set, then place in a corner (so he can't fall over) and let dry at least a few hours (preferably overnight).

DIY Oscar Ken Gorilla Glue disaster

Every maker knows that the first time you do a new project it never goes completely as planned, and our Ken/Oscar decided to pull a Toy Story and party a little harder overnight than we had hoped. (Doesn't his overflowing pool of Gorilla Glue look like Champagne foam?) Anyway, as our wise friends on Instagram pointed out, the joy of being a crafter is to "celebrate imperfection" — that's how you know it's made by hand!

Come hang with us at our 4th Annual #OscarUp tomorrow, Sunday February 24 from 6 to 10 p.m. at Collaboratory 4.0, 40 Berkeley Street in Boston, and you can take a photo holding our Ken/Oscar!
This blog is not written or edited by Boston.com or the Boston Globe.
The author is solely responsible for the content.

E-mail this article

Invalid E-mail address
Invalid E-mail address

Sending your article

 

About the Authors

Melissa Massello is a newspaper journalist turned startup junkie and lifelong Bostonian who prides herself on her do-it-yourself attitude. From making her prom dress out More »
Tara Bellucci is a Boston-based writer that lives for fonts, food, and flea market finds. Whether decorating jars of her homemade jam for The Boston More »

More community voices

Child in Mind

Corner Kicks

Dirty Old Boston

Mortal Matters

On Deck

TEDx Beacon Street

archives